Dripify Alternative: Do the Daily Quota Maths First
Dripify caps you at 20 to 75 connection requests a day. If your leads already comment on your posts, that ceiling is solving a problem you do not have.
TL;DR
Dripify is a LinkedIn drip campaign tool priced per seat, with daily activity quotas published on its pricing page: 20 connection requests a day on Basic, 75 on Pro and Advanced. Those quotas exist because cold outreach at volume is what gets accounts restricted.
Saylink does a different job. It watches your own posts and sends a DM to people who comment, so there is no cold list and no connection request ceiling to work around. If your leads are already in your comment section, the quota is not your constraint and a drip tool is not your answer.
Start with the quota, because it decides everything
Dripify publishes its limits, which is more than most tools do, and the numbers are worth sitting with.
On the Basic plan at $59 per user per month, or $39 annually, you get one drip campaign and 20 connection requests a day, 30 messages, 10 InMails, and 100 profile views. On Pro at $79 per user per month, or $59 annually, that rises to unlimited campaigns and 75 connection requests, 100 or more messages, 30 InMails, and 200 or more profile views. Advanced, at $99 per user per month or $79 annually, carries the same daily limits and adds team management, lead tagging, step analytics, and A/B testing. Each seat connects one LinkedIn account.
Now do the arithmetic for your own funnel. At 75 connection requests a day, with a typical acceptance rate somewhere between a fifth and a third, you are starting maybe 15 to 25 new conversations daily, before anyone replies to anything. Whether that is good depends entirely on how well your cold copy converts, and on nothing else.
Compare that with a post that pulls 200 comments. That is 200 people who raised their hand in a single afternoon, and no connection request quota applies to any of them, because you are replying to someone who spoke to you first.
This is not a trick of framing. It is the actual structural difference between the two categories.
What Dripify is genuinely good at
Working a defined list. If you have an account list and job titles, a drip tool marches through it in a controlled, repeatable way. That is the job it was designed for and it does it.
Multi-step sequences. Connection request, wait, message, wait, follow-up, with steps you can measure individually. Dripify's Advanced tier adds A/B testing and step analytics on top.
Team operations. Multi-team management, lead tagging, and per seat billing map cleanly onto an SDR team where each rep works their own territory.
Email alongside LinkedIn. All paid plans include LinkedIn and email sequences plus 100 email finder credits a month.
If your revenue comes from outbound prospecting into cold accounts, none of that is replaceable by a comment trigger. Do not switch.
What Dripify does not do
Dripify's published material describes drip campaigns: sequences aimed at prospects you select. It does not present comment triggered DMs as a feature.
That is not a criticism. It is a category boundary. Nothing in a drip campaign tool listens to your own post and reacts to the person who engaged with it, because that is a different event model. A sequencer is driven by your list and your schedule. A comment trigger is driven by your audience and their timing.
If the phrase "comment GUIDE and I will send it over" describes how you actually generate leads, you have been trying to solve an event problem with a scheduling tool.
How Saylink works, stated plainly
Saylink is a web app where you set up a flow, and the execution runs in the background through an authenticated LinkedIn session.
You choose a trigger: a comment on one of your posts, a like, a connection request. You choose an action: a DM sequence that delivers whatever you promised, usually a lead magnet. Someone comments, they get the DM.
The scope is deliberately narrow, and it is worth being explicit so nobody buys the wrong thing. It is one trigger and one action. There is no visual flow builder, no conditional branching, no multi-step campaign designer, no chatbot interface. Dripify has sequencing machinery that Saylink simply does not have, and if you need branching logic you should buy the tool that has it.
We describe the category as "ManyChat for LinkedIn", because the mechanism is the one Instagram and Facebook marketers have run for years: a public comment triggers a private message. ManyChat does not support LinkedIn, which is why this had to become its own tool, and why the ManyChat alternative for LinkedIn question comes up so often.
The price comparison people get wrong
Dripify is per user per month: $59, $79, or $99 depending on tier, less on annual billing, with one LinkedIn account per seat. Five reps means five seats.
Saylink starts at $39 per month, and you should know exactly how that scales before you sign up. Each additional LinkedIn account is 15 euros per month. Adding the email channel is 30 euros per month. So one founder on one account pays the base price, and an agency running five client accounts does not. It is not an all in figure and we would rather say so plainly.
The comparison that actually matters is not headline against headline. It is cost per conversation started. A drip tool's cost scales with seats and its output scales with quota. A comment trigger's cost scales with accounts and its output scales with how well your content performs. Those are different economics, and which one is cheaper for you depends on something the pricing pages cannot tell you: whether people comment on your posts.
Three situations, three answers
You post regularly and get real comment volume. A comment trigger pays for itself almost immediately, because you are currently doing it by hand or not at all. This is the clearest case.
You do not post, and your pipeline is built from lists. Buy a sequencer. Dripify is a fair choice, and so are its peers: we walk through a similar trade off in our Phantombuster alternative comparison. A comment trigger has nothing to trigger on.
You do both. Then they are not competing for the same budget line. One works the audience your content already earned, the other goes and finds new people. Plenty of teams run both, and they do not interfere with each other because they touch different contacts.
What the flow actually looks like
Concretely, here is the whole setup, because it is smaller than people expect.
You write a post that ends with an instruction: comment a keyword and I will send you the thing. You publish it. In Saylink you create one flow: trigger is a comment on that post, action is a DM containing the link. That is the configuration finished.
From there, every comment produces a DM. You watch the flow, not the inbox. If the post does well you do not do more work, which is the entire point, and if the post does badly no amount of tooling saves it.
Compare that with standing up a drip campaign: build the audience, write three or four steps, set the delays, warm the account, monitor acceptance rates, rotate copy when reply rates fall. That is a real operating routine. It is worth it when cold outbound is your channel. It is a lot of machinery when your channel is your own comment section.
On limits and account health
Dripify's quotas are not arbitrary. They exist because sending connection requests to strangers at volume is the behaviour platforms watch most closely, and the tools that survive are the ones that throttle hard. The Advanced tier explicitly lists advanced LinkedIn protection as a feature, which tells you how central the problem is.
Responding to someone who just commented on your post carries a different profile, because the action is what it looks like: a reply in a conversation the other person started. That does not make it risk free, and any automation on your account carries some exposure. It does mean that comparing the two tools' safety features side by side is not a like for like comparison, and you should be sceptical of anyone who presents it as one.
FAQ
Is Saylink a drop in replacement for Dripify?
No. Dripify runs cold outreach sequences against lists you build. Saylink reacts to engagement on your own posts. If you are using Dripify for cold prospecting, Saylink does not replace it.
Does Dripify support comment triggered DMs?
Dripify's published material describes drip campaigns aimed at selected prospects, and does not present comment triggers as a feature. Products change, so check their current documentation before deciding.
Which one is cheaper?
Saylink's entry price is lower, at $39 per month against Dripify's $59 per user per month. They are not equivalent purchases though. Dripify bills per seat with published daily quotas; Saylink bills a base price plus 15 euros per additional LinkedIn account and 30 euros for the email channel. Price your actual setup.
Can I get around Dripify's daily limits?
You should not try. The limits reflect what is safe for the account, not what the software could technically send. A tool that let you ignore them would be selling you a restriction.
What if my posts do not get comments?
Then a comment trigger has nothing to work with, and no tool fixes that. Your constraint is distribution. Sort the posting out first, then automate the part that becomes tedious.
If your comment section is the pipeline
Publish the post, promise the resource, and let the DM land while the comment is still warm. No list, no quota, no sequence to maintain.
Turn LinkedIn engagement into qualified leads
Saylink turns post comments into DMs — lead-magnet delivery, opt-in flows, and TOS-aware outreach. Like ManyChat, but for LinkedIn.
Get started